E & TC Engineering

This paper presents the overall cost-effective home Appliances such as a FAN control through Android mobile with wireless micro controller. This is designed using mobile technology will be beneficial to our society. The System is made to satisfy the needs of elderly and physically challenged people. There are many ways to control the app that may depend on many variables like electrical, mechanical or electronic. The most generic ones are direct and remote control which can be manual or automatic. Automated process gives more comfort for users, reduce risks and increase performance. In case of development of remote systems, the telecommunications, electronics and control concepts provides it possible to access and control any strategy, system or interface from a computer, mobile device with highly user friendly interface. Recent days the Smartphone and tablets are becoming powerful with new and useful characteristics. This is suitable to develop control systems. In this project, we introduce an Android OS based application for Smartphone that communicates with the fan through mobile device continuously to control the FAN speed. The Android platform plays a vital role to holds a maximum number of Users when compared to all other platform. (INTERNATIONAL CONFERENCE PAPER AVAILABLE)

Distribution transformers are generally provided  with advanced control measures that ensure their operation and safety at a high reliability because their failure  usually  leads  to  long  power  outage,  increase  maintenance cost and unreliable provision of electricity to customers. Despite the protection measures that accompany a distribution transformer, there is still a need to  provide  extra  remote monitoring systems  to  increase the reliability  of  operation and the  confidence  of  instantaneous fault  reporting.  This  paper  deals  with  the  design  and  construction  of  automatic  monitoring  system  for  power  transformer parameters. An Arduino board coupled with XBEE module were programmed to enable the monitoring of voltage, current and temperature  on  a typical  power  transformer.  The  system  was  implemented  and tested  successfully.  Results  showed that  the voltage versus temperature as well as current versus voltage characteristic obtained, were closed to datasheet specifications and therefore confirming the  reliability  of the proposed design. This system is therefore recommended as an  additional  protection that should be added to Power Transformers.(INTERNATIONAL CONFERENCE PAPER AVAILABLE)

PIR Motion Sensor Switch which can detect the Infrared Rays released by human body. The light or any other electrical appliance can be activated automatically by the active presence of a human body within the detection range / coverage area & when there is no presence the light will be deactivated automatically. PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyro-electric" or "IR motion" sensors .(INTERNATIONAL CONFERENCE PAPER AVAILABLE)

The precision of angular position control for DC geared motor using PID controller. The Arduino microcontroller board is mainly used to control the 12V brushed Namiki DC motor. L298N dual H-bridge motor driver is applied to execute the pulse width modulation (PWM) signal and to drive the direction control. The implementation code is considered to generate the PWM output using PID (proportional, integral and derivative) tuning algorithms. According to the PID tuning method, errors are not only solved but also taken to its minimal value with very low amount of error oscillations. In this work, step input, sine input and potentiometer input are tested to analyze the system performance. The results were clearly seen, the controller output response curve is very well-matched to approach the desired position. But, it has a few errors when the orientation of changes angle because they are not fast to reach the desired position. Therefore, friction compensation according to the velocity effect is considered. After compensating the friction effect, the PID output results were very precise to get the desired angle. This stability performance using PID controller can be applied for robotic arm position control system and other industrial applications.(INTERNATIONAL CONFERENCE PAPER AVAILABLE)

The main objective of this paper is to simplify the surveillance system in the jails without any human error using GPS and GSM. In general when police authorities and law enforcement agencies need to monitor movement of some suspected person or when a suspect is prohibited from moving out of a particular geographical system, it is very difficult to keep a constant watch on the suspect. Even it is difficult to track if any prisoner among the huge number of prisoner’s escapes from the prison through underground tunnel or by hiding in some kind of opaque objects. For such situations we propose a GPS and GSM based handcuff system that will keep the track of the suspect. Now the prisoner is allowed to move within a particular geographical area. When the prisoner moves within any geographical area the system on prisoner is in range of the prison/house or facility system and it does not track him. This is done by using RF wireless system. Now as soon as prisoner goes out of the specific geographical area the system detects that the receiver is not receiving signals from the transmitter mounted in the prison. The system sends an alert message to the receiver indicating the escape of prisoner. Then the GPS tracks down the prisoner by sending the real-time location of prisoner through GSM module by sending SMS. Thus this system automates the entire process of surveillance, house arrests and for patient monitoring using a PIC family microcontroller.(INTERNATIONAL CONFERENCE PAPER AVAILABLE)

“Creativity is inventing, experimenting, growing, taking risks, breaking rules, making mistakes and having fun.” Quoted by Mary Lou Cook, encouraged us to think on such a topic which can make our lives easier by overcoming the most common problem faced by the whole world. Sometimes, it is very difficult to find a suitable parking place in parking lot. We have proposed a suitable solution to this problem. Arduino has already made a huge impact on learning. The widespread acceptance gave the open source hardware a new life, potentially challenging many industrial products and new interests in hardware prototyping and electronics. Recent transition has been made from 8 bit to 32 bits and it is expected that in future Arduino may be seen in form of a cheap practical computer. You can also presently make custom cellphones using open source boards like the Arduino. Looking at this actionable advancement towards Arduino, allured us to make systematic and organized parking system for vehicles, using Arduino Uno. (INTERNATIONAL CONFERENCE PAPER AVAILABLE)

The rise of the Internet of Things has led to an explosion of sensor computing platforms. The complexity and applications of IoT devices range from simple devices in vending machines to complex, interactive artificial intelligence in smart vehicles and drones. In the paper we put forward the design of the coffee vending machines based on the technology of internet of things and its remote management system, which is aiming at the present problems, such as the high administrative cost and the difficulties in data analysis. This design not only makes the sales and supply information available, it can survey this information into cloud corner through WIFI as well.  (INTERNATIONAL CONFERENCE PAPER AVAILABLE)

The purpose of this project is that as we see nowadays purchasing and shopping at the malls have become a daily routine and essential activity in metro cities. The rush is even more when there are special offers and discounts & also during festivals and it has become a hobby too. The individuals buy different products and deposit them in the trolley, after total purchase one needs to go to billing counter for the payment. At the billing counter the person therein prepares the bill using code reader which will consume a lot of time and this then results in long queues at billing counters. So our main objective for making this prototype which will be introduced in the trolley and also reduce the labors and eliminate time taken in malls by designing an Automatic Billing Trolley. This will work as when the individual will put any of the product in the trolley, its product code will be stored in the database of the controller, and then the bill i.e. the name of the item and the cost of the product will be displayed on the LCD, which uses a RFID reader, all the products are equipped with the RFID tags. So at the billing counter, the total bill data will be displayed on PC which will be transferred by the RF Transreceiver. And also the bill is sent to the mobile phone through the Bluetooth module. And Also we have added one billing method which is by the swiping the card. (INTERNATIONAL CONFERENCE PAPER AVAILABLE)

A robot is usually an electro-mechanical machine that is guided by computer and electronic programming. Many robots have been built for manufacturing purpose and can be found in factories around the world. Designing of the latest inverted ROBOT which can be controlling using an APP for android mobile. And in which we use Bluetooth communication to interface Arduino UNO and android. Arduino can be interfaced to the Bluetooth module though UART protocol. According to commands received from android the robot motion can be controlled. The consistent output of a robotic system along with quality and repeatability are unmatched. This robots can be reprogrammable and can be interchanged to provide multiple applications. (INTERNATIONAL CONFERENCE PAPER AVAILABLE)

 The objective of this paper is to build a six legged walking robot which can perform basic functions like crawling forward and backward. Hexapod robots are used where stability and flexibility are demanded.The legs will have three degrees of freedom each. This robot will serve as a platform for basic surveillance purpose in industries. As the robot has six limbs, the robot can be easily programmed to configure many types of gait such as tripod, quadrapod and wall climbing robot.The robotic locomotion and image acquisition is based on the algorithms fed to the controller. (INTERNATIONAL CONFERENCE PAPER AVAILABLE)

The use of natural resources in our day today life is increasing which leads to shortage of these resources in the upcoming generation, mainly in transportation we are wasting a lot of crude oils and other resources which leads to global earthling. The name maglev is derived from magnetic levitation. Magnetic levitation is a highly advanced technology [1]. It has various uses. The common point in all applications is the lack of contact and thus no wear and friction [6]. This increases efficiency, reduces maintenance costs, and increases the useful life of the system. The magnetic levitation technology can be used as an efficient technology in the various industries. There are already many countries that are attracted to maglev systems. Many systems have been proposed in different parts of the worlds. This paper tries to study the most important uses of magnetic levitation technology. The results clearly reflect that the maglev can be conveniently considered as a solution for the future engineering needs of the world. So in this paper we’re discussing about magnetic levitation and the uses in transportation.(INTERNATIONAL CONFERENCE PAPER AVAILABLE)

From the past many years we are seeing the notices of the college , companies ,offices is usually displayed on the normal board having number of notices written on the same board .So we were thinking that if all these notices are displayed at the same place one by one except occupying the whole board area. So we come to the conclusion to design a Notice board such that it can fulfill the requirements such as less manual operation, same notice can be displayed at the various places at the same time, the notice (board display) should be visible from maximum area or distance, compact and compatible, easy handling.

Here we have come with the system which will not only help the army. The system can communicate over the long range around 100meter system will help the solder to set the target point once point is send to the slave the machine will work according to that and will fire the bomb at the enemy and allow the solder to stay hide and protected

Touch screen based Appliances Control System is used to control various electrical appliances in our home using a touch screen panel. This project can also be used in industries and colleges. We have provided 5 relays and a buzzer. This project can control AC devices as well DC devices. We have provided 2 DC devices and a buzzer with this project for demo purpose. User has to use a touch screen which acts as control panel for sending commands. These control commands are sent through a wireless RF communication module.

In today’s world we have automation in all areas; there is one field where technology not entered yet. It is the menu display & ordering system & so far there is no initiative to taken to introduce technology in this area.Touch-screen based advanced menu ordering is the method by which anyone will select any items by their choice which are in menu display & that order will be transferred to the cook or manager's personal computer using RF wireless transmission module & that ordered item will be given to that customer. Touch screens as a popular user interface are more and more common. Applications span from public information systems to Customer self-service terminals. Thus, as a Logical step, more and more devices today Feature this kind of user interface, e.g. Bank Automatic teller machines (ATMs), personal Digital assistants (PADs), mobile phones and displays.A touch screen is a display that can detect the presence and location of a touch within the display area. Lets one do so without requiring any intermediate device, again, such as a stylus that needs to be held in the hand. Such displays can be attached to computers or, as terminals, to it networks. Therefore it is very suitable for restaurant & time saving. It enables one to interact with what is displayed directly on the screen, where it is displayed, rather than indirectly call the waiter & ordered the menu. These devices also allow multiple users to interact with the touch screen simultaneously. Touch based interfaces have been around for a long time in consumer electronic devices, and even longer in research labs, but it has only been recently that the wider public has taken a keen interest in this mode of human?computer interaction.

Automated have added to the new look of the petrol bunks. A drastic change which has taken the city by storm is the petrol machines that have invoked a new look with automated systems invading this area also. This makes the customers know the exact quantity of petrol that has to be filled in, getting over the perennial problem of forgoing small change which most of the times the attendants at the bunks pocket for themselves. The traditional archaic pumps have now been replaced by more advanced EMP Petrol Pumps for proper filling of fuel. This not only ensures accuracy, but also saves a lot of time for customers and avoids misconceptions and arguments. To demonstrate this as a project we have developed a Micro controller based Petrol bunk automation system.

Depleting ground water table and deteriorating ground water quality are threatening the sustainability of both urban and rural water supply in many parts of India. The supply of cities that depend on surface water is threatened by pollution, increasing water scarcity and conflicts among users. For example, Bangalore depends to a large extent on water pumped since 1974 from the Kaveri river, whose waters are disputed between the states of Karnataka and Tamil Nadu. As in other Indian cities, the response to water scarcity is to transfer more water over large distances at high costs. In the case of Bangalore, the 3384 crore (US$517.8 million) Kaveri Stage IV project, Phase II, includes the supply of 500,000 cubic meter of water per day over a distance of 100 km, thus increasing the city's supply by two thirds. In some coastal areas seawater desalination is becoming an important source of drinking water supply. For example, the Chennai Metropolitan Water Supply and Sewerage Board has put into service a first large seawater desalination plant with a capacity of 100,000 m3 per day at Minjur in 2010. A contract for a second plant with the same capacity at Nemmeli was awarded in the same year. In india many time The timing Of water Distribution is not fix Many time the water Comes at late night that time People Struggle for this natural resources i.e water So to Overcome this problem. We are trying to implement this Project So that Human work will be reduced.

The phrase “Intelligent street lighting” includes a total system with dimmable luminaires, advanced lighting control solutions, communication systems and administrative tools. The solution focuses on low energy consumption and high functional standard. It also, in most contexts, automatically declines the maintenance costs for the operator in combination with increased safety for the street user. In most cases Intelligent street lighting in its practical design is identical to “Adaptive lighting”. Anyway one should distinguish between the two descriptions, remembering that Adaptive lighting only describes the performance of the light on the road, while Intelligent streetlighting also includes the more operational elements, back office software solutions and both energy and labour cost saving potentials. Streets or roads equipped with such a solution will dynamically adapt the street lighting performance according to the actual needs for the given period/time of the road. Typically it will lead to lowered lumen output from the lamp during good conditions, when low traffic volumes or low average speed appears in combination with non-foggy weather. This will also be the case if the surface is covered with snow.

In recent years, there has been a rapid increase in wireless network deployment and mobile device market penetration. With various research that promises higher data rates, future wireless networks will likely become an integral part of the global communication infrastructure. Ultimately, wireless users will demand the same reliable service as today's wire-line network provides. Through our device controller we can represent a safe & secure wireless communication with proper authentication and less loss of data. The circuit of our proposed project has two parts: (i)The hardware part The hardware part comprises of microcontroller AT89C51, DTMF decoder MT8870, voice recording/playback device APR9600 and a few discrete components. Microcontroller AT89C51 is the heart of the circuit. It is a low-power, high performance, 8bit microcontroller with 4 KB of flash programmable and erasable read only memory used as on-chip program memory, 128 bytes of RAM, 32 individually programmable input/output lines, a five vector two-level interrupt architecture, on-chip oscillator and clock circuitry.

Earlier days, people handle equipment careless way. So it may do very loss energy. so reduce this we develop this project. In this project we used microcontroller is the main controller of it. and which will control the loss of energy and saves money. Consider a office location in which temperature sensor is used for detecting Increase in normal temperature. When increase in the temperature then controller will start Fan to maintain the room temp. Normal. When LDR will sense the light it will make all lighting devices OFF and when it sense darkness it will auto start the all light devices ON. Due to this we save lot of energy and money.

We have designed the system which is the purely combination of the hardware and software the system is used to secure the import file or system such as ATM or PC server the system is used to monitor and control the password authentication system will help the person to generate the OTP for authentically so no need to remember the password the system will first first generate the otp and send it to the registered mobile no after that person will able enter the password once the password is correct then person can accesses the system

Our project provides the security in Indian military.Two sections are provided in the circuit. 1. Near the border which is totally which can be operated controlled automated manually A special type of human sensor is ultrasonic used to detects the human being around distance. This sensor uses the concept of ultrasonic Radiation. If anyone tries to cross the border means the sensor detects and it sends a signal to the microcontroller switch on the read led will turn on. And if the person is not within the range it will give the green indication of the system.

Boiler is one of the most important equipment in any power plants which require continuous monitoring and inspection at frequent intervals. There are possibilities of errors at measuring and various stages involved with human workers. So a reliable monitoring system is necessary to avoid catastrophic failure, which is achieved by Programmable Logic Controller & Supervisory Control and Data Acquisition system. This paper outlines the design and development of boiler automation system using PLC, SCADA and sensors. PLC and SCADA interfaced via communication cables. The initial phase of the paper focuses on passing the inputs to the boiler at a required temperature, so as to constantly maintain a particular temperature in the boiler. SCADA is used to monitor the boiler temperature, pressure and water level using different sensors and the corresponding output is given to the PLC which controls the boiler temperature, pressure and water level. If the temperature and pressure inside the boiler exceeds the predefined value then the entire system is shut down. In case of emergency different automated check valves are used to release pressure, steam and inform the concerned authority through alarm. Boiler automation ladder diagram is designed using WPL soft and SCADA design is done by Intouch wonderware.

Recently many cases of missing children between ages 14 and 17 years are reported. Parents always worry about the possibility of kidnapping of their children. This paper proposes an Android based solution to aid parents to track their children in real time. Nowadays, most mobile phones are equipped with location services capabilities allowing us to get the device’s geographic position in real time. The proposed solution takes the advantage of the location services provided by mobile phone since most of kids carry mobile phones. The mobile application use the GPS and SMS services found in Android mobile phones. It allows the parent to get their child’s location on a real time map. The system consists of two sides, child side and parent side. A parent’s device main duty is to send a request location SMS to the child’s device to get the location of the child. On the other hand, the child’s device main responsibility is to reply the GPS position to the parent’s device upon request.

Wouldn't it be great if you could control your computer with your hands? In this article, I will show you a small application I created to control the Windows Media Player with my hand motion and an ordinary web-cam. You can see the picture above; this application creates three "hot-spots" in the web-cam view, and you can assume that these hot-spots are virtual buttons, and they get activated when you make a click movement in them. I've programmed each of the hot-spots to control a particular button in Windows Media Player; the one at the top (blue) is for play/pause, and the other two are for next/previous songs.

The Government of India in an effort to ensure fair supply of food items to all citizens of India instituted under Public Distribution System (PDS). Essential commodities such as Rice, Wheat, Sugar, Kerosene, etc., are supplied to the targeted underprivileged sections as per the eligibility and at fixed by the Government of India. In spite of the best efforts by Government officials at various levels, there are a few bottle-necks and inconveniences to the targeted citizens in availing the services provided. The aim of this project is to organize and summarize existing theoretical and empirical work on corruption with a view identifying opportunities for further research. Computerization can help in modernizing. This project discusses strategy adapted in using ICT to control diversion and leakage in the delivery mechanism and its successful application in computerization of food grain supply chain. The objective of the project is to enhance the visibility, accessibility, and efficiency of the system by properly designing a software-system,

In electrical systems there are many kind for devices connected in a panel. These devices are for control and protection of the electrical systems. If any of the fault is generated in the system the devices connected for corresponding protection will close its NO contact so that it can be used further for tripping the system and indication. The Annunciator will get the input from these devices and it will show the corresponding fault by a buzzer is also given to give indication by sound. This system can be used where electrical systems are unmanned or at unmanned stations

Nowadays, most people know about recycling and engage with it to some degree, but many of us still either throw away or store old and unused electronics, simply because we don’t know what to do with them. But, there is an alternative: Feeding the unwanted electronics to ecoATM. Not dissimilar to a regular ATM, the ecoATM with eject cash in return for your unwanted device(s). It’s a great way to recycle your e-waste and earn money in the process! Death to all electronic waste (e-waste)! Only in a world where everyone worked together to combat e-waste would this be possible. With limited knowledge of how to rid ourselves properly of worn out electronics the wish to kill e-waste is even more elusive as a staggering amount is still produced every single day.

Parameter monitoring and control of greenhouse environment play an important role in greenhouse production and management. This project involve a design and implementation of an XBee based Wireless Sensor Network (WSN) that is used to monitor and control the essential greenhouse parameters, such as, temperature, humidity and light. This implementation supports the farmers to increase the crop production. The standalone XBee module, i.e., without microcontroller, is integrated with specific small size sensors. All monitored parameters are transmitted through a wireless link to computer via coordinator to be analysed, and then initiate suitable commands to the specific devices to overcome the drifts in an environmental parameters inside greenhouse.

Information and communication technologies are transforming our social interactions, lifestyles, and workplaces. One of the most promising applications of information technology is healthcare and wellness management. Healthcare is moving from an approach based on the reactive responses to acute conditions to a proactive approach characterized by early detection, prevention, and long-term management of health conditions. The current trend places an emphasis on the monitoring of health conditions and the management of wellness as significant contributors to individual healthcare and wellbeing. This is particularly important in developed countries with a significant aging population, where information technology can significantly improve the management of chronic conditions and thereby improve quality of life. In particular, the continuous or even occasional recording of biomedical signals is critical for the advancement of diagnosis by using wearable sensors Our aim behind making this system is to sense the Heartbeat and body temp anywhere without any help of doctors.

A remote online carbon dioxide (CO2) concentration Monitoring system is developed, based on the technologies of wireless sensor networks, in allusion to the gas leakage monitoring requirement for CO2 capture and storage. The remote online CO2 monitoring system consists of monitoring equipment. The monitoring equipment is composed of a Micro Controller unit (MCU), air environment sensors , global positioning system (GPS) receiver module, , liquid crystal display (LCD) module, and general packet radio service (GPRS) wireless transmission module. The sensor of CO2, temperature, humidity, and light intensity are used to collect data and the GPS receiver module is adopted to collect location and time information. The MCU automatically displays them on the LCD display module in real-time. Afterwards, the GPRS module continuously wirelessly transmits the collected information to the PC. This project uses regulated 5V, 750mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/9V step down transformer.

From the past many years we are seeing the the paper licking in companies ,offices is usually case due to that company or school collages suffer by many problem .So we were thinking that if all these paper get protected for that we have implement this project So we come to the conclusion to design a System such that it can fulfill the requirements such as less manual operation, but protection will be 100% so we have design this

People like doing outdoor activities such as picnic, fishing and for medical purpose which is to deliver medicine to village. They need a Portable Refrigerator to keep cooling their food or medicine. Also they require some important function such as mobile charging, LED light etc. Objective of the system Focused on designing and fabricates a Portable Refrigerator which is powered by battery which can be can be useful application in outdoor activities such as, • Picnics • Sports • Vehicles

Individual plant care cropping systems, embodied in precision farming, may lead to new Opportunities in agricultural crop management. The objective of the project was to provide high accuracy seed position. The results showed that the overall accuracy of the estimated plant positions is acceptable for the guidance of vehicles and implements. For subsequent individual plant care, the deviations were not, in all cases, small enough to ensure accurate individual plant targeting.

Robotic vehicle controlled by the hand movement mainly benefits the disabled person, as those person with the hand gesture moves to the direction they want to go without pressing any buttons. This system includes a glove which has a receiver circuit which will be mounted on the top with Atmega microcontroller interfaced to the accelerometer and it is supposed to be worn by the user while using this machine. The circuit on the vehicle includes FR receiver, ARDUINO microcontroller and Driver IC to operate the motors. The commands that are received by the IC on the circuit are sent to the RF transmitter which forwards the command to the RF receiver. The command from RF receiver then gets trasmitted to the ARDUINO microcontroller which decodes the command and makes the vehicle move in the direction specified by the user.

Most educational institutions administrators are concerned about student irregular attendance. Truancies can affect student overall academic performance. The conventional method of taking attendance by calling names or signing on paper is very time consuming and insecure, hence inefficient. Figure print based attendance system is one of the solutions to address this problem. This system can be used to take attendance for student in school, college, and university. It also can be used to take attendance for workers in working places. Its ability to uniquely identify each person based on their FINGURE make the process of taking the attendance easier, faster and secure as compared to conventional method. Students or workers only need to place their fingure on the reader and their attendance will be taken immediately. With real time clock capability of the system, attendance taken will be more accurate since the time for the attendance taken will be recorded. The system can be connected to the computer through RS232 or Universal Serial Bus (USB) port and store the attendance taken inside database. An alternative way of viewing the recorded attendance is by using HyperTerminal software. A prototype of the system has been successfully fabricated.

This project proposes an effective algorithm for detecting and classifying defects which are presents in industrial pipe. Presence of holes and cracks in pipe are an important indicator in manufacturing process to avoid environmental destruction and high cost. Because of the small diameter of pipes, human cannot examine these pipes directly. Therefore to overcome these problems an algorithm has been introduced to detect the defects in industrial pipes. The proposed algorithm can identify defects from background and the types of defects present in pipe can be distinguished in the estimation stage. This project also focuses on monitoring various parameters like temperature, water level, and light intensity. Our system is designed with different sensors. The design includes interfacing of various sensors with PIC controller and LCD display. The gathered information will displays on LCD. Thus our system is designed for multiple input and output arrangements for industrial applications.

The fast development from claiming engineering Has made our lives easier. The coming innovations also expanded Those traffic dangers and the street mishaps occur habitually Which makes enormous reduction from huge lives due to poor Emergency services and facilities. Proposed work will give Acceptable ultimate answer for this weakness of existed systems. As stated by this undertaking when a vehicle meets for a mishap Or accident, instantly a Micro-Electro-Mechanical System (MEMS) vibration sensor will identify the signal and sends it will To ARM controller. ARM controller will direct to Global Positioning System (GPS) to find the area and coordinates from Claiming accident location. Furthermore by utilizing Global System for Mobile Communication (GSM), microcontroller sends The caution message including geographic allotment coordinates Of rescue vehicle to nearby ambulance, hospital, police, and Relative of the victim person. In this way the salvage cooperation ambulance in the rescue team of hospital will track accident area Promptly by using geological area coordinates on Google earth Provision or alternately whatever viable geographic area Discoverer requisition. After adjusting the area accident spot the Rescue vehicle unit will begins its salvage operation. This Framework also controls the traffic signals in the way about Rescue vehicle so that it will enable rescue vehicle to arrive at Clinic in least period.

Nurses all around the world have risen to the challenge of new technology. Today, the nurses work in a variety of E-Health programs such as tele-triage. They access the person helath details. Nurse can also control the devices in the Hospital such as light fan. Nurses are also involved in standards development for the implementation of electronic health records and many nursing educational programs are now offered online. But this system is person depended so we have come with the system which will help the user to take medicine control hospital light automatically using the RTC(real time clock) the system will help the hospital and patient to monitor their medicine time and also will help the hospital to switch the devices automatically with the specified time by the user this system will also make the voice announcement for the user to understand which medicine should they take

Though an entire industry has spurred around the lack of availability of safe drinking water in public places, the truth is that only a small percentage of the country’s population can afford the luxury of packaged water. A need that has been neglected by the government has given way to innovative initiatives to provide the populace clean and fresh drinking water. One among them is a New Delhi-based start-up JanaJal, which literally means ‘water for people’. The start-up has pioneered the concept of hybrid water dispensers, christened Water ATMs. . The start up is also considering introducing pre-paid cards so that there is no hassle of managing cash. “The initiative was started about eight years ago, while I was working on water treatment technologies. The idea of providing safe drinking water at an affordable cost struck me. Thereafter, we worked to develop these hybrid water ATMs,” says Agarwal. Typically, one water ATM requires an investment of about ?10 lakh which includes cost of equipment, taxes and installation costs. “Till date 25 have been set up and we now have an order book of over 1500 ATMs across several States including Tamil Nadu, Andhra Pradesh, Rajasthan, Maharastra and Gujarat. “If we execute these 1500 water ATMs the funding requirement is about Rs. 150 crore. We are looking at various sources, including the Prime Minister's Mudra Yojana to meet our funding requirements,” says the CMD. It has also bagged the mandate to install 100 ATMs on the river banks of the Ganga.“Our water ATMs are now functional in Pune, Nellore, Delhi, Varanasi, Siliguri and Chennai and more than 35 million litres of safe drinking water has been delivered thus far,” he concludes.

In our regular life the telecommunication field plays a vital role. There is a complete revolution in the way we communicate, specifically long distance communication, Irrespective of all these advancement in the field of telecommunication, the physically impaired people have not that much amount of access as compared to normal peoples for these technologies. This project is based on inventing a messenger for the differently disabled set of Humans, who may not be in the position of using mobile phones for messaging or any other kinds of communicating devices, with the satisfactory comfort, which is known as application. This system is linked with a GSM module to make the SMS send and receive the blind person and to establish a two way communication path by using a wireless technology Here the user sends the SMS to the blind person’s mobile number which is connected to the microcontroller which is able read the SMS using GSM module through inbuilt the AT commands and then converts the characters of the SMS into the Braille language using the lookup table present in its memory. With the help of Microcontroller vibrates the Braille pad which act as platform on which the blind person can read the SMS. The purpose of this study is to save Braille human life in particularly understanding for SMS character using read and write the Braille people have understanding the character of SMS using micro vibrators.(IEEE BASED AVAILABLE)

                LATEST PROJECTS 2020

Robot is a reprogrammable, multifunctional gadget which is basically intended to do work like human, for example, pick and place, stacking and emptying, observation, social insurance, modern, aviation application. Robots can perform hazardous and precise work to build the profitability as they can work 24 hours without rest. In this paper, we will focus on the issues of patient and user safety, security, and privacy, and specifically the effect of medical device regulation and data protection laws on robots in healthcare. First, we will examine the demand for robots in healthcare and assess the benefits that robots can provide. Second, we will look at the types of robots currently being used in healthcare, anticipate future innovation, and identify the key characteristics of these robots that will present regulatory issues. This robot is used to provide medicines and sprinkle sanitizer when person is come in front of robot by using ultrasonic sensor. Camera is providing on robot to monitor all the movements of robot. We can monitor the and operate the robot by using android app

This project presents design and application of an autonomous E-tourist guide system with provision of multi-language (English and Marahi) to help tourist in new geographical region with their mother language or well-known language. RFID tags are provided for login purpose and then tourist can autonomously carry the handheld, portable device in the region and submit the device while leaving the area hence no human power is required and autonomously runs the system. Voice module is use for storing the audio notes files can be added in the system. At every place roam tourist notify with the text message by system with help of GSM module. Message contains information of that place. User also intimate with the current temperature, weather report, disaster intimation, latitude and longitude etc. In build facilities of latest ARM 32 Cortex processor STM32 are used like temperature sensor, RTC, communication channel, timers etc for developing features and operate at very low power consumption with very latest graphics because OLED is use as display device. Thereafter, network coverage is not further required as the applications execute in standalone mode. Hence system enhances guiding systems and improving tourists experience in their touring